10 Tips on How to Care for Your Mixer Grinder

This magical appliance allows you to combine a lot of liquids and sometimes even with them. Apart from this, there are so many other dishes that you can prepare using a mixer grinder, for example, your favorite salsa dip.

If you have recently purchased the mixer grinder and don’t know how to care for it properly, here are a few tips that can help you.


10 Helpful Tips for Taking Care of Your Mixer Grinder:

1. Clean it:

How to Care for Your Mixer Grinder

It is necessary to keep your mixer grinder clean for the next time you use it. This is very obvious but gets overlooked a lot of times. Just getting it out of water is not adequate; you need to deep clean it from time to time. 

You’re not supposed to do it every day, but at least once a week would do. Adding a dash of vinegar and baking soda solution to your mixer while cleaning will help you eliminate those stains and odors.

You can also use dish soap, preferably a liquid, and turn on your mixture after adding a little water. 


2. Temperature check:

It is mixer grinder 101 to never put anything extreme into it. Whether it is too hot or too cold, make sure that it comes to room temperature first. 

The blades can become blunt and rubber gasket porous if you don’t follow this. If this happens, you can see leakage in your mixer grinder. 


3. Always switch off the circuit:

Always switch off the circuit

If you do not turn off the circuit after using the mixer grinder, the chances are that you will ruin it. So instead of procrastinating here, try turning it off after every use.


4. Never fill it to its full capacity:

Mixer Full Capacity

At times this happens that you tend to pour a little too much into the mixer grinder altogether. It would be best if you try not to do that. 

If you fill more than half of the mixer vessel, the pressure on the blades would reduce the effectiveness and can ruin your mixer in the long run.


5. Lock the jar:

Keep in mind that you lock the jar properly before turning the mixer grinder on. If you don’t do that, the blades start fighting each other and damage the entire grinder.


6. Keep it gradual:

Do not immediately turn the speed setting of the mixer grinder to high. Start with the first setting and then move your way upwards. This will keep the efficiency of your mixer grinder intact.


7. Secure the lid:

If you ever forget to secure the lid of your mixer grinder vessel, be prepared to clean the entire kitchen afterward. If the lid is not secure, all the ingredients will start spelling out of the jar.


8. Keep it dry:

After washing your mixer grinder, make sure that you dry it well. If any moisture is left in the vessel, it can ruin your blades in no time.


9. Recommended accessories:

After getting an expensive product, a lot of people use cheap accessories. Always use the accessories that the manufacturer has suggested. Any third-party accessories can ruin your mixer grinder.


10. Safe and secure:

It is one of our favorite pieces of equipment in the kitchen but make sure you keep it out of reach of children. Storing a mixer grinder near water can deteriorate it. So make sure that you place it somewhere safe.



Using your mixer grinder harshly can deteriorate its effectiveness. Make sure to plug it in nicely without leaving any gaps between the plug and the electric board. 


Also Read:

Best Mixer Grinder Under 3000

Best Food Processor in India

Best Wet Grinder in India


The bottom line-

We hope that all these tips will help you increase the effectiveness and life of your mixer grinder. After all, you would want this easy-going and speedy equipment to stay with you a little longer than anticipated.

In the comment section below, let us know which tip you found the most effective from the above article. 

Leave a Comment