How to Assemble an RO water purifier without the Help of a Technician?

The crisis of water shortage has now become a global concern. The risks and consequences of using low-quality water are not hidden to anyone. Thus, many serious efforts are taken in favor of saving as much water as possible.

One of the promising solutions that most of us rely on is the use of RO water filters. The filters are known to enhance the water quality, making it safe, pure, and clean for use. Thanks to its efficiency, many people are now using RO filters to improve the quality of water they use.

Finding and choosing a suitable RO system has its own hassles; you need to consider many factors before making any final choice. However, the struggle doesn’t end just with ordering your RO system; installing it correctly is a different dilemma altogether. You have to be absolutely sure and perfect while installing the RO system to ensure its uninterrupted functioning.

The different parts and the proper installation steps are a little confusing. The different number of pieces simply just enhances the struggle of assembling them together.

But, do you know, you can easily install an RO system at your place without the need of a technician? Yes, you read that right.

Installing an RO without the help of a technician is surely a little difficult, but it is not impossible. You just need to be aware of the accurate procedure and steps to follow to overcome any hassles that come your way of installing your RO by yourself.

If you are interested in knowing the simplest procedure of installing an RO system all by yourself, then this guide will surely appeal to you. We have collected all the necessary information needed to minimize any hassles or complications with the self-installation of the RO water purifier.

 

Assembling And Installing An RO Water Purifier Without Any Technician Help:

Assembling an RO has some technicalities, but they can be handled very smartly if you know what to do and when. It is no rocket science to assemble different parts of an RO system together; it is just a smart piece of work and following the right steps.

Before we begin with the in-depth procedure of installing an RO system, let us look at the preparation phase needed.  You should be well-prepared with a handful of things to not get disturbed or interrupted during assembling.

Preparation for assembling your RO:

The very first preparation that you should focus on is to have good enough space for installation. You need to keep different RO parts and tools together, and therefore, you would need a spacious surrounding.

Apart from this, keep these things handy with you for installing an RO without any difficulties:

  1. The available user manual. You will get a user manual with your RO system
  2. The RO module
  3. A storage tank
  4. The filter cartridges
  5. Filter faucet
  6. RO membrane
  7. Installation kits
  8. Various tools like – drill machine, wrench, cutter, knife, screwdriver, Teflon tap, drill bit, etc.

Once you are through all these requirements and necessities, you are now ready to start with the installation steps.

 

Steps for assembling an RO system without a technician:

RO water purifier is a necessity for almost every household today. It is, therefore, expected that a technician is needed for its successful installation and later for its efficient working.

However, with the right knowledge and awareness, you can skip relying on a technician for RO assembling. Installing the system on your own will not just make you better aware of its working, but it will also help you save the additional installation charges. Isn’t it just great?

So, without any further here and there, let us have a look at the following steps that can help you install your RO system without any technician:

Installing a tap or faucet:

Installing a tap or faucet

The first step is installing a tap or a faucet that will act as the source of getting pure and clean water. The correct installation of the tap can be challenging, and therefore, you should be particular in following the steps accurately.

Here are the few details that you should focus on –

  1. After you have decided the location for RO installation, check if your sink has a pre-installed sprayer. If yes, you should disconnect the same, followed by covering the same connection using a cover cap. No further need of drilling is required.
  2. However, if there isn’t any sprayer installed, you would have to make one by yourself. This is where you would need to drill the hole, assuring to do so in the right position. Choose a flat surface for drilling for ease and convenience.
  3. After you have successfully drilled the gap, inset the faucet stem in the space and secure it tightly to avoid leaks. Slide the lock washer and the hex nut from underneath the surface for a secure connection. You can use a wrench to ensure a secure connection.
  4. You should position the faucet correctly so that it drains directly in the sink without any leaks.

 

Fitting the drain saddle:

Fitting the drain saddle

After the correct and secure installation of the faucet, the next attention should be given to the fitting of the drain saddle. The drain saddle is quite important for the RO wastewater. It creates a clear connection for draining beneath the sink.

Most people often struggle with the correct positioning of the drain connection, resulting in clogged RO filters along with bad odors. But if you pay a little attention, you can avoid this problem completely.

While you fit the drain saddle, make sure to keep it away from the disposed of garbage or the area of garbage disposal. Also, the fitting should have a height of 6-inches from the p-trap for smooth flow.

For a convenient fitting of the drain saddle, make a ¼ inch drilling hole on either the top or side of the draining line. Align and secure the drain clamp using the bolts. While doing so, do not completely tighten the hole and always maintain the same gap on both the saddle side.

 

Inlet feed valve installation:

Inlet feed valve installation

The installation of the inlet feed valve simply means connecting your purifier with the cold water pipeline. Though it seems easy, here are a few things that you should keep in mind during this step –

  1. Before establishing the connection, make sure to close both the hot and cold water supply pipelines. You can make use of the respective valves to release the required pressure in the desired pipeline.
  2. Disconnect the old connection. Make arrangements for connecting the available RO’s feed valve. After successfully attaching the feed valve, make use of a wrench for securing the connection tightly.
  3. In the next step, connect the feed valve with the cold water pipeline.
  4. Finally, turn on the pipeline and check the water flow. If the flow is uninterrupted, you are good to go. However, if you find any blockage in the flow, check the entire connection again until you get a smooth flow.

 

Assembling of the pre-filter:

Assembling of the pre-filter

Remove the filter cap and insert the pre-filter candle. Once you have successfully inserted the filter, seal all the connections of the cap using Teflon tape.

Also, make arrangements to connect the 2 available connectors on both sides of the pre-filter.

 

Attach the storage tank and filter compartment:

You need to store water when using a RO system, and thus the placement of the storage tank is pretty important. Make sure to choose a correct and convenient place to attach the storage tank for easy access.

It is recommended to keep the storage tank in a close range of the faucet. For easy access, keep the distance between the storage tank and faucet limited to 10-feet. You can use the Teflon tape to secure the connection with the tank connector.

After doing this, attach all the accessories of the filter compartment tightly and securely. Make sure to completely avoid any kind of leaks to minimize the wastage of water during the use of your RO system.

 

Install the RO membrane:

The RO membrane should be inserted in the RO cabinet with proper care and precautions. Open the cabinet spacing and then insert the membrane inside carefully without pushing it abruptly.

Once the membrane is placed securely, close the opening of the RO cabinet and secure all the connections tightly.

 

Test the RO system:

After you have inserted the RO membrane, you have securely done all the installation and required attachments. Now, it is time to test the working of the system with an initial run.

Before you plug in the RO system to check its working, make sure to check all the interior and exterior connections. Secure all the connections if lose to prevent any risks of a leak in the future.

Post checking the connections, but the RO system at its desired place. Leave the outer pipe in the sink to allow proper draining of water. Now, plug in the system to make it function.

These are the steps that you need to follow for an easy installation of your RO system all by yourself. After your RO system is properly functioning, it is advisable to drain the very first water supply as it contains impurities. Run an entire cycle before consuming the second supply of water.

If you find any leaks, it is better to get in touch with the brand assistance or a plumber for the best results.

 

Related Buying Guides our Blog

  1. Best Non-Electric Water Purifier
  2. Best Water Purifier under 15000
  3. Best Water Purifier under 10000
  4. Best UV Water Purifier in India

FAQs Related to Self-Installation of An RO System:

Is it risky to install an RO system?

As you are dealing with connections, there is a little risk factor for sure. However, fortunately, there isn’t anything serious to worry about as all the required connections can be easily made.

Moreover, if you face leaking problems, you can get the desired help from the plumber or the brand itself. Thus, installing an RO system is not such a risk as it is thought of.

 

Is it too hard for beginners?

When you are doing anything for the first time, there are some problems that you learn from. Similar, when installing an RO system for the first time, there will be many new things that you will learn.

Being a beginner, there are many things that you have to take care of and explore, like finding the right place for installation or tightly sealing the connections, etc. But the right knowledge and detailing can make everything super easy and convenient.

 

How much time does it take to assemble an RO system?

Generally, the installation of the RO system takes 2 to 4 hours. The beginners may take a little longer with installation, like about 4-5 hours, depending upon their understanding of the entire process.

If there are any leaks or other complications, then the installation time may increase according to the situation.

 

Still not convinced?

Installing an RO system can be confusing and time-consuming, especially when doing it for the first time. But by following the right steps, you can overcome all the hassles and complications that may come your way during the installation.

For any further assistance, you can get in touch with us in the comment section. We are always available to provide you the best possible help.

 

 

Leave a Comment