All the following methods on cleaning the iron from burnt fabric are suitable only if you are in a remote village and there is no way to go to the store and buy a special pencil for 3 kopecks!
- 1 WHICH IRONS CAN BE CLEANED IN ANY WAY?
- 2 HOW TO CLEAN THE FABRIC FROM THE IRON?
- 3 WHAT TYPES OF IRONS ARE AND THE SPECIFICS OF THEIR CLEANING
- 4 METHOD 1. CLEANING THE IRON WITH A PENCIL
- 5 METHOD 2. FINE SALT
- 6 METHOD 3. USING A PARAFFIN CANDLE
- 7 METHOD 4. VINEGAR
- 8 METHOD 5: TOOTHPASTE
- 9 METHOD 6. SODA
- 10 METHOD 7. HYDROPERITE
- 11 METHOD 8. AMMONIA OR HYDROGEN PEROXIDE
- 12 FROM FILM (POLYETHYLENE)
WHICH IRONS CAN BE CLEANED IN ANY WAY?
If you have a dirty new, expensive iron made of Teflon, we strongly recommend you not tempt fate and experiment with “grandmother’s” methods. If you have money for a good iron, try to find a little more – for a special cleaning agent.
Nothing terrible will happen if you clean the device not today, but in a few days, when you can buy a pencil or a particular drug. It is better to borrow an iron from a neighbour for a day than to risk equipment. But, if we are talking about an old, good iron originally from the USSR, without any holes and special coatings, you can do what you want. He will endure everything! Naturally, there is also no need for fanaticism.
To pull the iron brush “sole” – a thankless task.
So you clean it for once, but then it will get dirty and darken much faster. And it will darken – it will leave stains on clothes.
HOW TO CLEAN THE FABRIC FROM THE IRON?
By and large, there are no special techniques for removing tissue. The burnt place is just as cleaned as ordinary soot. To do this, all means that soften the crust and repel dirt from the surface are suitable.
If the piece of fabric is quite large, carefully clean it with a knife, and remove the remnants of contamination using the following methods. You can not even clean the material; it will disappear if the iron is treated with this composition.
It is impossible to remove the burnt fabric the first time in sporadic cases if you use a pencil. But, if it still does not work, then use a knife. The main thing – do not scratch, and that’s all.
WHAT TYPES OF IRONS ARE AND THE SPECIFICS OF THEIR CLEANING
As we wrote above, the most persistent is the old iron, Soviet. But, in our time, it is a rarity. Therefore, let’s start from modern realities.
Consider all the famous soles and determine which is the most vulnerable and can be rubbed with something hard.
With aluminium sole
This type has a big plus – excellent thermal conductivity, multiplied by the budget price. But, aluminium is a soft metal, and over time, the sole is covered with a mass of minor scratches.
No abrasives here! This happens even if you are very protective of the thing and do not rub anything. Therefore, we do not advise you to “finish” the device in an attempt to clean it cheaper.
With stainless steel sole
But this will be stronger, but such irons are now rare. It can be rubbed well.
But, I must say, the plus that it is easy to clean does not outweigh the minus of uncomfortable ironing. With such a sole, you need to be “on the alert” and be sure to use gauze, through which they iron.
And, again, the more microsccrawls on the sole, the faster it gets dirty. Therefore, be vigilant and vigilant!
Iron with the ceramic sole
These are good irons, but they require a careful operation. Do not use abrasives; it is better to clean or ready-made means, or liquid, for example, acid.
In general, the ceramic coating is more robust than Teflon. But, if Teflon can be torn off, then the ceramic coating wears merely off with time.
It’s a good thing but highly flimsy. Therefore, there is no need for amateur activity; the inventors of pencils have already invented everything for you. And, if the fabric sticks to such an iron, it is better not to use knives since the chance of damaging the thinnest coating of Teflon is too great.
And, if you damage it, it will rust! After all, under the layer of Teflon – metal, and not at all stainless steel.
So, let’s get closer to the topic and consider how to ride the iron of the stick on the sole independently.
METHOD 1. CLEANING THE IRON WITH A PENCIL
All these pencils are the same. They are based on ammonia, which is why, when used, there is a pungent smell. Do not worry; it is not harmful, and terrible fumes will not poison you.
And now see how to use a pencil for an iron:
1. Heat the iron to the recommended temperature (indicated on the package with a pencil). As a rule, this is not the maximum degree of heating, about “two”.
2. Carefully “paint” the entire surface with a pencil, bypassing the holes for steam to escape. A pencil should not fall into them. It will melt and drain from the sole during the application, “taking” dirt and soot with it. If you have a burnt fabric on the exclusive, then, most likely, the procedure will have to be carried out a couple of times in a row until the ammonia softens the sticky piece well.
3. Cool the iron and wipe off the remnants of the pencil clean.
This is the most effective way, remember. Fast, safe and clean. What else do you need?
METHOD 2. FINE SALT
To do this, you need to pour a handful of (quite substantial) salt on a sheet of A4 paper or some unnecessary fabric. Salt choose not coarse grinding, but “Extra”.
Heat the iron move the sole over the salt. In theory, it should absorb the remnants of soot. Remember that salt is abrasive, and do not use this method for models that can not be cleaned.
Step-by-step instructions for cleaning the iron with salt:
2. Scatter salt on paper
3. Drive a hot iron on salt
4. Wipe the cooled sole with a clean cloth
If the badly burnt sole is not cleaned immediately, throw this idea and do not try to rub salt as hard as possible.
METHOD 3. USING A PARAFFIN CANDLE
Similarly, the candle is applied to the hot sole, equally erased. And this method is somewhat similar to the use of a pencil. But, if the pencil is a mixture of unique chemistry that dissolves the soot and repels it from the surface, then the candle is just a candle.
Try it if the iron is not very dirty. It’s not going to get any worse. And whether it will be better – there is no longer a fact. The main thing is that you are in business, and it is safe.
How to clean the iron with a candle:
1. Wrap an ordinary paraffin candle in some cloth so that the dripping paraffin does not burn your hands
2. Warm up the device
3. Apply evenly to the sole of the paraffin
4. Cool the iron and wipe it with a cloth
METHOD 4. VINEGAR
Yes, acid – helps to overcome dirt and soot. Vinegar is a universal soldier in our housewives. Therefore, the method can be safely recommended.
The only “but”… If your iron is of suspicious production and is very cheap, then first check the vinegar on a tiny piece of sole.
Be sure to do this so that you do not cry and curse the damn Chinese when the coating swells and begins to climb before our eyes.
This is not a joke, but a reality, dear readers. For example, cheap faucets of Chinese production – just “shed the skin” if they get some strong acid or bleach.
How to clean the iron with vinegar:
1. Use vinegar diluted with water, about 50 to 50.
2. Wet the cotton wool with a solution and wipe the sole thoroughly. If the spots are small, they very easily and quickly depart almost immediately.
3. If we are talking about burnt fabric, then wet with vinegar solution some thick cloth and put an iron on it. Let it stand like this at least the whole night, and by the morning, the material will go away, and the soot will dissolve.
4. At the end of any of these procedures, wipe the surface with a damp cloth with clean water (to remove the smell of vinegar), and then dry, clean.
METHOD 5: TOOTHPASTE
It needs a lot, which means that it is not so economical compared to a pencil. Moreover, it is not very well then wiped off (especially if it gets into the holes for steam). But, fishless and cancer fish, therefore, you can try this option.
But remember that he is white and “pestering”! If you do not open the remnants well, they will be perfectly imprinted on your chic, black blouse.
How to use toothpaste to clean the sole:
1. Apply the paste in a thin layer with a piece of sponge, for example.
2. It is unnecessary to warm up the iron since the paste will be welded.
3. Let it stand a little in this form, then wash the paste. Wash thoroughly!
METHOD 6. SODA
Soda is a good thing, but for baking. It is not the best option for cleaning since it does not have any unique dissolving properties. If we are talking about abrasive cleaning, then yes, here – please. But, it’s all for old models, as you remember.
Cleaning the iron with soda:
1. Wet a clean rag with water, squeeze well, type soda on it
2. Treat the surface until it is clean.
If there is a burnt fabric on the sole, then remove it with a knife preliminarily. And cleaning with soda is the second stage. It cannot be said that this method will save the iron from dirt quickly. Most likely, the procedure will have to be done repeatedly.
METHOD 7. HYDROPERITE
If you are a blonde who uses hydroperoxide in the old fashioned way, then this method is for you! If he lightens his hair, then he will deal with the soot on the iron quickly.
But, remember that this is a relatively aggressive tool, and an inexpensive iron may not withstand the experiment.
So, how to clean the iron with hydroperoxide tablets:
1. Dilute the tablets to a mushy state
2. Apply this mass to the sole
3. Warm up the device and then cool
4. Wipe off the remnants of the tablets with a cloth
METHOD 8. AMMONIA OR HYDROGEN PEROXIDE
Step 1. Apply these solutions to a cotton pad
Step 2. Wipe the sole thoroughly until completely clean (not the fact that you will achieve it, true)
Step 3. Then rinse with a cloth with clean water, wipe then dry.
FROM FILM (POLYETHYLENE)
And it happens, yes. Naturally, no one irons plastic intentionally. But it happens that the iron falls into the hands of children or, you iron a thing on which some inserts suddenly melt and stick tightly to the sole.
There’s nothing wrong with that. Just like in the case of fabric, you need to scrape this place with a knife.
Ways than to clean the sole – you can invent a thousand and one. Is it necessary?
In the yard of the 21st century, therefore, you should not get too carried away with homegrown methods, as they are more time-consuming and not as effective as ready-made means.
4 Ways to Clean the Bottom of an Iron
But how to prevent soot and save not yet spoiled burnt things. How can you protect yourself from such trouble?
First of all – it will save your memory; this is the best prevention. Well, be careful and do not catch crows when you turn on the iron!
Check what mode the heating is on before you lower it on the thing.
After all, it is much easier to prevent the fabric from sticking than to furiously tear off a melted piece of synthetics, for example. What else can you protect yourself? Does a special non-stick coating save? Yes, it holds, and you can buy yourself such a thing. It’s convenient and not that expensive.
In conclusion, I would like to recommend you to watch the video. There are exciting tips on how to clean a Teflon iron, for example, the same Tefal.